나에게 좌절감을 안겨 주었던 Leo4All v2...
이번에 Leo4All V3가 새로이 나왔다

일단 official release note...

So here we are with Leo4Allv3. MD5 checksum should be :

48b3bea091a9247238b6534098e102f9

 

I have included a PPF patch that swaps out the AppleNforceATA.kext for an older version for those that get kernel panics. The MD5 for this swap should be:

34a17bd1f79b4c379d95d48a94911073

  

First and most importantly is a totally rebuilt filesystem. The advantage with this is I no longer had to script a repair permissions from the DVD. This speeds install a good bit for most people. Don't worry if the timer says some outrageous time, as it does not calculate it correctly. The initial package install is very large and takes the most time, but once its done the install is almost done. I still recommend running repair permissions from Leopard once your all loaded up to fix some errors, but none of these will stop the system from booting. If you run it twice you should see zero errors on Intel and 2 SUID files on AMD. There is an install script that crashes on AMD machines causing this, but to keep everything perfect on intel I chose to leave the script intact.

This DVD now supports AHCI with more than 2 drives thanks to the updated kext's posted by Cyclonefr.

Also fixed this go around is X11 for both Intel and AMD. If, when you close it the first time, cpu usage jumps to 100% open terminal and type xeyes & to fix it. You will need to reboot after, but it should never glitch again.

Due to some complaints I removed my old logo and replaced it with my favorite desktop background, hope you like it.

 

There is no longer a ./RemoveVideo script, it has been updated and is now called

./options.

If you boot with -s at the Darwin prompt and mount your drive with

/sbin/fsck -fy

/sbin/mount -uw /

./options

you will see options to remove video drivers, account loop fix, and extensions repair. These are the most common issues so I have just automated them. If you do the account loop fix be sure to setup a proper account once booted into Leopard.

 

From inside the installer you will notice alot of new options, I will cover the main ones of interest:

 

ACPIPlatform:

 

You now have a choice between ACPIPlatforms, version 1.1.0 is the default install if nothing else is selected. This is needed for the laptop Power Management bundle to function,  but if you have an older system you can choose 1.0.3 from Tiger. Alternately you can choose the stock version 1.2.1. Included inside version 1.1.0 and 1.2.1 is ACPIPS2Nub(proper version) for your PS2 support. There should be no more PS2 issues! !

 

AppleSMBIOS:

 

I put in lots of choices for different versions based on bus speed if you want it to show your proper memory speed, or if you want your hack to look like a real mac. The default install if nothing is selected is Netkas improved version 27.

Options are:

DDR667

DDR800

DDR1066

DDR1333

iMac

MacBook

MacPro

 

Kernel:

 

I have added Netkas 9.2.0 sleep kernel, and 9.2.2 binpatched kernel ny Modbin(Be warned this does not work on all AMD machines! SSE3 CPU is required!). The default install is still Netkas 9.2.0 speedstep kernel. There are also the Stock kernels(vanilla) 9.2.0/9.2.2

 

RemoveFireWire:

 

For those that have issues with FireWire, or those that just want to speed their boot time a little. This moves all of the IOFireWire kext's to /FireWire folder in the root of your install drive.

 

About This Mac:

 

This is my own little installer to customize "About this Mac" with your processor info. No it does not fix memory speed, you have to do that with AppleSMBIOS. It should work for all languages and should report overclocked CPU's properly.

 

Power Management:

 

By popular demand I added the laptop power management bundle to the install. You will still need to set it up in system preferences. This is known to have a few minor bugs. It may not report the proper time remaining or any time remaining for that matter, so use at your own risk. If you select this please do not select an ACPIPlatform, as this requires version 1.1.0.

 

AMD System Fix:

 

You will notice it is checked and greyed out by default. To take out alot of user error (people forgetting to check it for their AMD systems) I have added a script to detect the CPU and patch accordingly. When its running it will echo your processor information in the install log (if you show all). It will then skip the patch process if your on Intel or patch if its an AMD. I hope it works well for everyone!

 

Bootloader:

 

This option is checked and greyed out by default. It is Dense's script to install EFI and make the partition active. If you already have an existing bootloader (like from Vista) on the same logical drive it will not overwrite it. It will however flag the partition you installed to active, so you will have to manually set your Windows partition active again if needed.

 

Chipset Drivers:

 

(NOTE- JMicron is the only driver that always installs so please choose at least 1 option, some will have to choose 2 [if you have Marvell IDE and Intel SATA for example] ) If your not sure you can click all but 1 Nforce, as they will overwrite each other.

 

Nforce Old - This is the older version of Medevils Nforce(1.0.2) driver. Install this if you have issues with SATA enabled causing a panic. Known to work for some Nforce3 users.

 

Nforce Test- If you have a SATA DVD or do not have issues booting the DVD normally choose the NforceTest.

 

SiliconImage3132 - I have not found anyone that uses this specific chipset to confirm if it works.

 

VIA, SiS, Marvell and SB - Please install this if you are using any of these chipsets. If you have a Marvell IDE drive please install this as they should be supported. I have added many ID's here so I hope they all work! This chioce installs AppleVIAATA, AppleOnboardPCATA and AppleGenericPCATA. Confirmed working for SiS!

 

SAS - By request I added support for this, as of my writing this its untested. Hopefully it works.

 

Intel ICHx- If you have ICH7/8/9 chipsets you should install this. This is the modified version by -Dune- to support more than 2 drives and fix the over 2Gigs of RAM panics.

 

Audio:

 

These choices have not changed much, only added support for STAC9271 by request. If your not sure what chipset you have, please choose AzaliaAudio(for most HD) or AC97Audio.

Chioces are:

ALC850/882/883/888/889

AC97Audio

ADI1988

STAC9271

AzaliaAudio

 

Graphics Drivers:

 

I have updated many of these packages.

ATI- there are options for:

3850

3870

2600XT(PCIE)

2600XT(AGP)

3870X2

2600PRO(PCIE)

2600PRO(AGP)

X1600(PCIE)

X1600(AGP)

X19X0

X1400 Mobility

 

Nvidia- I have updated the drivers to the latest available from the Mac Pro's and editied to include all Device ID's I could verify. This should cover mostly all 6XXX/7XXX/8XXX series cards. Here are the ID's supported(not all confirmed working yet) Feel free to search for yours on the list.

0x033310de 0x033010de 0x033110de 0x030110de 0x030210de 0x034410de 0x034310de 0x034110de 0x034210de 0x031410de 0x031110de 0x031210de 0x032610de 0x032310de 0x032110de 0x032210de 0x014f10de 0x00f310de 0x022110de 0x016310de 0x016210de 0x016110de 0x016210de 0x016010de 0x014110de 0x00f210de 0x014010de 0x00f110de 0x014210de 0x00f410de 0x014310de 0x014710de 0x004110de 0x00c110de 0x004710de 0x00f610de 0x00C010de 0x004510de 0x00f910de 0x00c210de 0x004010de 0x00f910de 0x004310de 0x004810de 0x021810de 0x00c310de 0x016710de 0x016810de 0x014810de 0x00c810de 0x00c910de 0x03d010de 0x03d110de 0x03d210de 0x024110de 0x024210de 0x01df10de 0x039310de 0x01d110de 0x01d310de 0x01dd10de 0x039210de 0x02e110de 0x039110de 0x039410de 0x00f510de 0x009210de 0x009110de 0x029110de 0x029010de 0x029310de 0x029410de 0x009810de 0x009910de 0x029810de 0x029910de 0x029510de 0x042310de 0x042210de 0x042110de 0x040210de 0x040010de 0x061110de 0x019310de 0x019110de 0x060010de 0x040710de 0x039810de 0x022210de

 

NVinject- By request I have added options for different version of Nvinject(0.1.3/0.2.0/0.2.1). If your not sure choose version 0.2.1 with the proper amount of RAM your video card. I have added a modified version of 0.2.1 for 1Gig of VRAM.

GMA950 - QE/CI+resolution change with some artifacts

GMA950 - No Aritfacts QE/CI but no resolution.

GMAX3100 - suppose to give QE/CI(confirmed for device ID 0x2a02)

 

Network Drivers:

 

ForceDeth- This is compatible with most Nforce LAN.

ForceDeth-V - This is compatible with most Nforce LAN(recommended version)

Skge - Driver for most Marvell LAN cards.

RTL8187- Just as it says for Realtek 8187

Zydas USB- For the USB Wireless LAN adapter

Tiger IO80211- Some Atheros cards require this Tiger version to work. Default install is IO80211 from 10.5.2

Broadcom- WLAN driver for BCM4306/4309/4318/4320/4324

RT2500- Suppose to support Dlink WMP54G v4.0, may support some others.

ViaRhine- Just as it says, for ViaRhine chipsets

Intel 100Pro VE- Just as it says, for the Intel 100Pro VE chipset

RT2860- Driver for some chipsets like WL-181, may also work on some others.

 

Good Applications:

 

You can choose to install or not, but I do recommend many of these useful programs. They include:

Adium

AppZapper

BBEdit

CandyBar

Colloquy

FireFox

Gumby 50c

Invisibles

KCNScrew

KextHelper

Marvin's AMD Utility

MD5

Pacifist

PackageMaker version 2.1(old harder to find)

Stuffit Expander

Textmate

Transmission

TubeSock

Unison

VLC

Xbench

 

일단 이렇다니.. 새로운 삽질을 안해볼수가 없지 않겠는가...

하지만 토렌트 속도가 너무 안 나온다는거.. ㅠㅠ
지금 다운 받고 있는데 언제 다운이 끝날지 모르겠다
일단 많은 사람들이 다운받고 배포해야 제대로 나올텐데 아직까진 속도가 잘 안 나온다
어쨌던 Leopoard 10.5.2에서는 이게 마지막 삽질이길 바라며...
하루속히 10.5.3이 나오길 바랄뿐이다

P.S.
약 5시간에 걸쳐 다운을 받았다
초반에 속도가 좀 많이 안 나오지 한참 지나면 그래도 다운 속도가 붙으니까 조금 기다리시길.....

Posted by DanielKang Trackback 15 : Comment 2

댓글을 달아 주세요

  1. addr | edit/del | reply Favicon of http://totoromori.tistory.com BlogIcon 샬럿 2008.04.23 05:38 신고

    오오~ Mac OS 쓰세요?
    전 MS사가 거이 모든걸 자기네꺼에 최적화시켜서 MS의 손아귀에서 떠날 수가 없어요ㅠㅠ~

    • addr | edit/del Favicon of http://www.danielism.com BlogIcon DanielKang 2008.04.23 08:43 신고

      아뇨.. Mac OS를 쓴다기 보다는 주 OS는 vista ultimate 64bit인데
      곁다리로 ubuntu랑 Mac OS X Leopard도 같이 쓰고 있어요
      근데 쓰다보면 의외로 Windog를 안 써도 별 불편 못 느낍니다
      구지 Windog+Explorer 조합을 원하는 국내 사이트를 제외하고는요